BENSON BENDX ACHW 34, Руководство по эксплуатации

Страница: 18 / 33

1 6
2)DRILL HOLES AND MOUNTING INSTALLATION PLATE
CAUTION:
i) Please check the unit weight for each model. Always ensure that the wall is sufficiently
strong to withstand the weight. If not,it is necessary to reinforce the wall with plate, beams
or pillars.
ii) Th e installation plate pr ovided MUST be used , this maybe mounted on another multiply
sheet were the plate does not pick up enough fixing points.
, •Paste the installation plan provided on the des ired location on the wall and mark the holes
location accordingly.
•Ensure that the minimum maintenance and servicing space at the top,left and right side of
the units is reserved.
•Ensure also the levelness of the installation p late 1­2` down towards the drain end .
•Drill the screw mounting holes(minimum 4 scr ews are required).
•Drill the pipe hole at the location as per plan . (This is only applicable for rear piping outlet
installation).
Note:The hole should be drilled slightly lower at outdoor side as per figure below:
•Fix the installation plate firmly to wall,with out tilting to left or right.Use a plumb line,if available.
•Fixing method: