BenQ W1500 Скачать руководство пользователя

Страница: 29 / 72

Important safety instructions

Using the projector

Preparations

1. Plug in and turn all of the connected equipment on.
2. If not already in, plug the supplied power cable into the AC inlet on the

rear of the projector.

3. Plug the power cable into a wall power outlet and turn the wall switch

on.

Please use the original accessories (e.g. power cable) only with the device to
avoid possible dangers such as electric shock and fire.

Turning the projector on

Follow the steps below.

1. Make sure the Power light is orange after power has been applied.
2. Press and hold

POWER

( )

on the projector or

on the remote control to turn the projector

on. As soon as the lamp lights up, a "

Power On Tone

" will be heard. The POWER indicator light

flashes green and stays green when the projector is on.

To turn off the ring tone, see

"Turning off the Power On/Off Ring Tone" on page 41

for details.

3. The fans will start operating, and a start-up image displays on the screen for a few seconds while it

warms up.

The projector will not respond to further commands while it is warming up.

4. If you are prompted for a password, press the arrow keys to enter a six-digit password. See

"Utilizing

the password function" on page 32

for details.

5. "Source Searching..." will be displayed on the screen before the projector identifies the input source.

This message will remain on the screen until a valid signal is detected. See

"Selecting an input source"

on page 30

for details.

6. If the horizontal frequency of the input source exceeds the range of the projector, the message "No

Signal" will be displayed on the screen. This message will remain on-screen until you change the input
source to an appropriate one.

Содержание W1500









































































Результаты поиска

Содержание W1500

Отзывы:

Похожие инструкции для W1500

Бренды по названию

Популярные бренды

BenQ W1500, Руководство пользователя

Результаты поиска

Содержание W1500

Отзывы:

Похожие инструкции для W1500

Бренды по названию

Популярные бренды