27
Important safety instructions
Wireless transmitter synchronization
The factory default configuration will pair your HDMI source device with the projector. If the connection
fails, follow the procedures below to set the pairing.
1. Connect the wireless transmitter to an HDMI source device. (e.g. Blu-ray, DVD player, AV-R player,
set top boxes, or games consoles)
2. Turn on the projector.
3. Select
Wireless
in the source selection bar.
4. Press
MENU/EXIT
on the projector or remote control, and select the
System Setup
menu.
5. Set
Wireless Sync
to
On
.
When Wireless Sync is on, the projector will not respond to any key commands from the projector or
remote control, except the power [On] and power [Off] keys. If you've accidentally started this function,
please re-start the projector to save the settings.
6. Press the buttons on the remote control in the following sequence:
(for 3 ~ 6 seconds) >
>
.
Please point the remote control toward the IR sensor on the rear of the projector.
7. When the
Select Video Source
menu displays, select
Settings
.
8. In the
Settings
menu, select
Add New Video Source
.
Содержание W1500
Страница 1: ...W1500 Digital Projector Home Cinema Series User Manual ...
Страница 3: ...3 Table of contents Warranty and Copyright information 72 ...
Страница 4: ...4 Table of contents ...
