Introduction
12
English
Remote control effective range
Infra-Red (IR) remote control sensor is located on the
front and the rear of the projector. The remote control
must be held at an angle within 30 degrees perpendicular
to the projector's IR remote control sensor to function
correctly. The distance between the remote control and
the sensor should not exceed
7 meters (~ 23 feet).
Make sure that there are no obstacles between the remote
control and the IR sensor on the projector that might
obstruct the infra-red beam.
17. S-VIDEO
Displays the S-VIDEO source selection.
See
"Switching input signal" on page 28
for details.
18. PC
Displays the PC source selection. See
"Switching input signal" on page 28
for details.
19. HDMI 2
Displays the HDMI 2 source selection.
See
"Switching input signal" on page 28
for details.
20. Right cursor/Panel Key Lock (
/
)
: Navigates and changes settings in the
OSD. See
"Using the menus" on page
25
for details.
: Activates panel key lock. See
"Locking
control keys" on page 39
for details.
21. Down cursor/Keystone (
/
)
: Navigates and changes settings in the
OSD. See
"Using the menus" on page
25
for details.
: Manually corrects distorted images
resulting from an angled projection.
See
"Correcting keystone" on page
30
for details.
22. ASPECT
Select the display aspect ratios. See
"Selecting the aspect ratio" on page 31
for details.
23. CONTRAST
Displays the CONTRAST setting bar. See
"Adjusting Contrast" on page 34
for details.
24. SHARP
Displays the SHARPNESS setting bar. See
"Adjusting Sharpness" on page 34
for details.
25. TINT
Displays the TINT setting bar. See
"Adjusting Tint" on page 34
for details.
26. COLOR
Displays the COLOR setting bar. See
"Selecting a Color Temperature" on page
35
for details.
27. BLANK
Hides the screen picture. See
"Hiding the
image" on page 38
for details.
28. FREEZE
Freeze/unfreezes the on-screen picture. See
"Freezing the image" on page 39
for details.
29. TEST
Displays the test pattern.
Appro
x. ±15
°
Appro
x. ±15
°