Introduction
11
English
Remote control
1.
IR transmitter
Transmits signal to projector.
2.
LED indicator
Lights only when the key is pressed
3.
POWER ON
Toggles the projector between standby
mode and on. See
"Starting up the
projector" on page 24
for details.
4.
VIDEO
Displays the VIDEO source selection. See
"Switching input signal" on page 28
for details.
5.
COMP
Displays the COMPONENT source
selection. See
"Switching input signal" on
page 28
for details.
6.
HDMI 1
Displays the HDMI 1 source selection.
See
"Switching input signal" on page 28
for details.
7.
Up cursor/Keystone (
/
)
: Navigates and changes settings in the
OSD. See
"Using the menus" on
page 25
for details.
: Manually corrects distorted images
resulting from an angled projection.
See
"Correcting keystone" on page
30
for details.
8.
Left cursor/Information (
/
)
: Navigates and changes settings in the
OSD. See
"Using the menus" on
page 25
for details.
: Starts the INFORMATION
function.
9.
MODE/ ENTER
MODE: Choose a suitable preset mode
for usage environment.
ENTER: Enter key for OSD menu.
10. MENU/ EXIT
MENU: Turns on the On-Screen Display
(OSD) menu.
EXIT: Goes back to previous OSD menu,
exits and saves menu settings.
See
"Using the menus" on page 25
for details.
11.
USER 1/ User 2/ User 3
Select the User memory settings.
12. BRIGHT
Displays the BRIGHTNESS setting bar.
See
"Adjusting Brightness" on page 34
for details.
13. MUTE
Mutes the built-in speaker.
14. /-
Adjusts volume. See
"Adjusting the
sound level" on page 41
for details.
15. LIGHT
Turns on or off the remote control backlight
for about 10 seconds. Pressing any other
key while the backlight is on keeps the
backlight on for a further 10 seconds.
16.
POWER OFF
Turns off the projector. See
"Shutting down
the projector" on page 42
for details.
7
8
13
20
21
22
24
27
17
2
3
4
5
6
9
1
16
18
12
26
19
10
11
23
25
15
14
29
28
