15
Positioning your projector
Correcting keystone
Keystoning refers to the situation where the projected image becomes a trapezoid due to angled
projection.
To correct the distorted image:
1. Display the
2D Keystone
correction page from the following menus.
• The setup wizard during the projector initial setup
• The
Basic
menu system
• The
Installation
menu of the
Advanced
menu system
2. After the
2D Keystone
correction page appears:
• To correct keystoning at the top of the image, use
.
• To correct keystoning at the bottom of the image, use
.
• To correct keystoning at the right side of the image, use
.
• To correct keystoning at the left side of the image, use
.
• To reset the keystone values, press
BACK
for 2
seconds.
• To automatically correct the vertical sides of the
distorted image, press
OK
for 2 seconds, or enable
Auto Vertical Keystone
in the
Advanced
menu -
Installation
menu.
3. When done, press
BACK
to save your changes and exit.
Press
.
Press
.
Press
.
Press
.
