background image

2  

 

Copyright

Copyright © 2015 by BenQ Corporation. All rights reserved. No part of this publication may 
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any 
language or computer language, in any form or by any means, electronic, mechanical, magnetic, 
optical, chemical, manual or otherwise, without the prior written permission of BenQ 
Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to the contents hereof and specifically disclaims any warranties, merchantability or 
fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this 
publication and to make changes from time to time in the contents hereof without obligation of 
BenQ Corporation to notify any person of such revision or changes.

Power Safety

• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The 

socket outlet should be installed near the equipment and be easily accessible.

• This product should be operated from the type of power indicated on the marked label. If you 

are not sure of the type of power available, consult your dealer or local power company.

• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm

2

 must 

be used.

Care And Cleaning

• Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD 

monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass 
cleaners.

• Slots and openings on the back or top of the cabinet are for ventilation. They must not be 

blocked or covered. Your monitor should never be placed near or over a radiator or heat 
source, or in a built-in installation unless proper ventilation is provided.

• Never push objects or spill liquid of any kind into this product.

Safety warning and precautions

• The warranty may be void if any of the instructions in this user manual are not followed. 

Improper use will invalidate the 

guarantee. These safety instructions also apply to original 

accessories.

Please follow these safety instructions for best performance, and long life for your monitor.

Содержание SW24 series


















































Отзывы: