Using the remote control
9
Eng
lish
• These options will only appear when corresponding signals are connected to
the display.
• If both Composite Video (AV) and S-Video signals are connected to the AV3
input at the same time, only S-Video input will be displayed. If you wish to view
the Composite Video (AV) input in such case, remove the S-Video connection
temporarily.
• Be aware that HDMI input must be HDCP-compliant to be displayed properly.
When switching to the HDMI inputs, the display needs approximately 3 seconds
to detect the HDCP information from the signal source and no image will be
displayed during this period. This is not a malfunction.
Viewing traditional (analog) or digital TV
• To view traditional (analog) TV or CATV programs, press
電視
(TV)
on the
remote control.
• To view digital TV programs, press
數位電視
(DTV)
on the remote control.
The digital TV function requires a separate DTV tuner with available digital TV
signal connected.
Adjusting sound settings
Adjusting the volume
• Press
音量
(Volume)
+ on the remote control to increase volume. The volume
indicator will increase in length as volume rises.
• Press
音量
(Volume) -
on the remote control to decrease volume. The volume
indicator will decrease in length as volume falls.
Mute setting
Press
靜音
(Mute)
on the remote control to turn off the sound temporarily.
Press
靜音
(Mute)
once more, or press
音量
(Volume)
+ to restore the sound
level.
MTS (TV Sound selection)
Press
雙語
/
語音
(MTS)
on the remote control to toggle TV sound among
available modes. (The modes available will depend on the TV or Video sound
system being received).
Turning on/off the Surround sound effect
You can press
環繞音效
(Surround)
on the remote control to turn on or off
the display’s SRS TruSurround XT sound effect. The SRS TruSurround XT
sound technology makes it possible for the display to deliver true-to-life
sounds by simulating multi-channel audio output. It also helps to enhance
the clarity of verbal conversations.
Selecting a preset EQ mode
Press
音場效果
(EQ Mode)
on the remote control to select a suitable EQ
(Equalizer) mode according to your preference.
Changing channels
Selecting a channel directly
• To select a single- or double-digit channel, press the corresponding channel
selection buttons on the remote control. For example, to select channel 8,
press
and
on the remote control.
S37Y_S42Y-Tuner-RC-EN-4J.01A05.001.book Page 9 Tuesday, April 10, 2007 5:02 PM
