BenQ SH Series, Быстрый старт

Страница: 16 / 38

Section 1: Quick Start Guide 14
Eng
lish
6. Connect the power cable
1. Locate the power cable from the packaging, and plug the appropriate end
into the
AC-INLET
socket on the rear of the display (as illustrated below).
2. Connect the other end into an appropriate wall power outlet, and flip the
main power switch on the display to the
ON
(
I
) position. The display will
enter standby mode and the power indicator (on the front lower right) will
light up red.
• The supplied power cable is suitable for 110V AC power only.
• The type of power cable plug and socket illustrated may differ from the type
used in your region.
• Only use an appropriate power cable for your region. Never use a power cable
which appears damaged or frayed.
• Never change the plug type on a power cable. Be aware of total loading when
using extension cords or multiple outlet power boards.
WARNING:
This display has been engineered and manufactured with the highest priority on
safety, however, IMPROPER HANDLING OR USE CAN RESULT IN POTENTIAL
ELECTRICAL SHOCK OR FIRE HAZARD. Please handle this display with care. If
damaged, turn off the power and unplug the power cable from the display.
Transport the display to your nearest BenQ authorised service centre for repair.
7. Adjust the viewing angle
Power switch
Power outlet
Power cable
AC-INLET socket
This display is equipped with a adjustable
swivel base. If necessary, turn the display
screen to an appropriate angle (maximum
15 degrees left and right) for more
comfortable viewing.