BenQ PL490, Руководство пользователя

Страница: 43 / 53

Change your settings 39
Information OSD
When you press
POWER
button to turn on the display from
standby mode or change the input signal, the information OSD is
displayed on the upper left corner of the screen.
Choose
Off
to turn off this function.
Cooling Fan
Select On to turn on the cooling fan all the time. Select Auto to
turn on/off the cooling fan according to the display’s temperature.
• The default Auto option will start running the cooling fan if the temperature
of 60°C (140°F) is reached.
• A temperature-warning message will be shown on the screen if the
temperature reaches 70°C (158°F).
• After the temperature reaches 70°C (158°F), for three successive minutes
and a temperature-waning message shown on the screen for 10 seconds, the
display power will be shut down automatically while Power LED will be
blinking red & green.
Network control
port
Choose the RS232 control form Card OPS or embedded RS232
in PD set.
Factory settings
Reset all your customized settings to the factory defaults.
Only monitor ID won't be reset.
Network Settings
1. Press
HOME
button, choose
Network Settings
and press
OK
button.
Picture View network settings
Sound Network configuration
Tiling Static IP configuration
General settings Digital Media Render...
Network settings Network name
Name Description
View network
settings
View connected network status.
Network
Configuration
Network configuration
: Choose how this display should assign
addresses to the network resources.
The user can choose
DHCP & Auto IP
(
suggested
) or
Static
IP
.