Operation
33
Setting the presentation timer
Presentation timer can indicate the presentation time on
the screen to help you achieve better time management
when giving presentations. Follow these steps to utilize
this function:
1.
Press Timer Set up on the remote control or go to
the SYSTEM SETUP: Basic > Presentation Timer
menu and press Mode/Enter to display the
Presentation Timer page.
2.
Highlight Timer Period and decide the time period by pressing
/ . The length
of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240
minutes in 5-minute increments.
3.
Press
to
highlight
Timer Display and choose if you want the timer to show up
on the screen by press
ing
/
.
4.
Press to highlight Timer Position and set the timer position by pressing
/
.
5.
Press
to
highlight
Timer Counting Direction and select your desired counting
direction by pressing
/
.
6.
To activate the presentation timer, press and press
/ to highlight On and
press Mode/Enter.
7.
A confirmation message is displayed. Highlight Yes and press Mode/Enter on the
projector or remote control to confirm. You will see the message “Timer is On!”
appearing on the screen. The timer start counting at the time the timer is on.
Selection
Description
Always
Displays the timer on screen throughout the presentation time.
1 min/2 min/3 min
Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
Top-Left
Bottom-Left
Top-Right
Bottom-Right
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decreases from the preset time to 0.