69
Troubleshooting
The Button
The Button
automatically
restarts sometimes.
Insufficient power
supply.
• Make sure you use USB 3.0 as
the power supply for the
Button.
• If the USB 2.0 port is the only
option for the power supply
for the Button, try to reduce
the power consumption of the
Button by changing
Picture
Quality Mode
to
Low
Power
in Web Management.
The LED indicator
on the Button
remains static red
even after it has
been powered on
for 30 seconds.
The Button has not
been properly
powered off during
the resetting process
Reset the Button.
The pairing function
cannot be executed
via the
MODE
key
while the Button is
powered on and the
LED starts flashing
red.
The Host
Nothing is shown
on the display at all.
The display is
switched off.
Switch on the display.
The wrong input is
selected.
Select the correct input.
The display cable is
not connected
properly.
Insert the HDMI cable between
the Host and the display device
again.
The display fails to
show the Host’s
output resolution at
1080p in "Guide
Screen" or "Idle
Screen".
Replace the display with a new
one that supports output
resolution at 1080p.
The Host is in
Network Standby
Mode
when network
standby function is
enabled.
Press the Present key of the
Button to start presentation.
Category
Problem
Cause
Solution
