BenQ DHS500, Руководство пользователя

Страница: 57 / 82

Recovering your system using QDataTrove 53
Restoring your system to factory default settings
QDataTrove allows you to restore your system drive (C: drive)
to the factory default configuration.
1. In QDataTrove, click the
Restore
tab.
2. Click the button to select
Full System Restore -
Factory Default Settings
.
3. A dialog box asking whether you wish to adjust the size of
disk partition appears.
4. Follow the remaining on-screen instructions to complete the
operation.
Restoring your system to your own backup
system image
QDataTrove allows you to restore your system drive (C: drive)
to a previous state with your own backup system image.
1. In QDataTrove, click the
Restore
tab.
2. Click the button to select
Full System Restore -
Backup Image .
3. An
Open
dialog box appears. Browse to select a backup
system image, and then click
Open
.
4. A confirmation message appears. To proceed with the
operation, click
Yes
.
5. Follow the remaining on-screen instructions to complete the
operation.
Restoring your system from a restore point
QDataTrove allows you to restore your system drive (C: drive)
to previous states by restoring from a list of restore points (if
available).
1. Click the button to select
Restore from a Restore
Point .
2. A
System Restore
wizard then appears on the screen.
Follow the step-by-step on-screen instructions to complete
system restore.
Reinstalling bundled applications and drivers
QDataTrove allows you to reinstall the applications and drivers
that are bundled with the Joybook you purchased.
1. Click the button to select
Reinstall Applications
and Drivers .
2. You can perform the following tasks on the main screen that
appears.
• If you select "Yes", all programs you installed or data you
saved on both the C: drive and the D: drive will be erased.
• If you select "No", all programs you installed or data you
saved on the C: drive will be erased. However, data on the
D: drive will not be affected.
To perform this operation, a backup system image file is
required. For details about making your own backup system
image, refer to
"Backing up your system into a single file" on
page 51 or "Backing up your system into a disc" on page 52 .
To perform this operation, a restore point is required. For
details about manually creating a restore point, refer to
"Creating a restore point" on page 52 .
For more information about System Restore, refer to Start >
Help and Support in Windows Vista.