BenQ DHS500, Руководство пользователя

Страница: 53 / 82

Using BIOS setup 49
•
Change User Password:
This set of password controls the
user's access to the BIOS setup utility. When typing the
password, first make sure Num Lock is off, and then type your
password in the entry field and press <Enter>. Confirm your
password by typing it again and pressing <Enter>.
•
Password Check:
This item determines whether the
password is required to boot the system or enter the BIOS
setup utility.
•
Setup:
The password is required to enter the BIOS
setup utility.
•
Always:
The password is required to enter the BIOS
setup utility and boot the system.
Exit menu
The Exit menu displays ways of exiting BIOS setup. After
finished with your settings, you must save and exit so that the
new settings can take effect.
•
Save Changes and Exit:
saves the changes you have made
and exits BIOS setup. After finishing with your settings, you
must save and exit so that the new settings can take effect.
•
Discard Changes and Exit:
exits BIOS setup without saving
the changes you have made.
•
Discard Changes:
cancels all changes since last save, without
exiting the BIOS setup utility.
•
Load Optimal Defaults:
loads the default values for all the
items in the BIOS setup utility.
If Supervisor Password and User Password are both set, you
can enter either one of them during the password prompt. To
have full privileges in BIOS setup, enter Supervisor Password.
It is recommended that you go into BIOS to load manufacture
defaults, whenever you have installed new hardware
components.