BenQ DC C50, Руководство пользователя

Страница: 8 / 46

BenQ DC 5530 User’s Manual
Preparing your DC C50 for using
4
E
n
gl
is
h
P
REPARING YOUR
DC C50
FOR USING
2.1. Loading the battery
2.2. Using an AC Power Adapter:
Note
•
!
Use only the specified battery type (Lithium Ion).
•
!
If you are not going to use the battery for an extended period of time, remove it from
the camera to prevent leakage or corrosion.
•
! Avoid using battery in extremely cold environments as low temperatures can shorten
the battery life and reduce the camera performance.
You can use a Lithium Ion battery to power on the camera. Battery power is convenient for
capturing images or video clips.
1.
!
Make sure the camera power is off.
2.
!
Open the battery/SD Memory Card cover.
3.
!
Insert the battery in the correct orientation shown.
•
Tilt the battery lock lever toward the strap
attachment and then insert the battery following
the orientation of the arrow on the batteryís label.
•
Insert the battery as far as it can go.
4.
!
Close the battery/SD Memory Card cover.
•
To remove the battery:
Open the battery/SD Memory Card cover and
then release the battery lock lever. After the battery
is slightly ejected, pull out the battery slowly.
Battery lock lever
1.
!
Make sure the camera power is off.
2.
!
Connect one end of the AC power adapter to the
DC IN 5V terminal.
3.
!
Connect the other end of the AC power adapter to a
power outlet.
Note
•
Make sure to use only the AC power adapter specified for the camera. Damage caused
by the use of an incorrect adapter is not covered under the warranty.
•
!
Using an AC power adapter while transferring images to your computer in order to
prevent unexpected automatic power off of the camera.