BenQ DC C50, Руководство пользователя

Страница: 9 / 46

BenQ DC 5530 User’s Manual
Preparing your DC C50 for using
5
E
n
gl
is
h
2.3. How to charge the Battery:
2.4. Loadig an SD Memory Card:
All images and video clips taken by the camera can be stored in an SD (Secure Digital)
Memory Card. ! Even if the cameraís power is OFF, the images saved in the SD Memory Card
are not erased. An SD Memory Card can be repeated read and written.
1. ! Make sure the camera power is off.
2.
!
Slide the battery/SD Memory Card cover into the direction of the [OPEN] arrow.
3.
!
Insert the battery, noting correct polarity (+ and -).
4.
!
Slide the battery lock lever to adjust the battery.
5.
!
Close the battery/SD Memory Card cover firmly.
6.
!
Connect one end of the AC power adapter to the DC IN 5V terminal.
7.
!
Connect the other end of the AC power adapter to a power outlet.
Charging start: Green indicator
Charging end: Indicator off
Stand by: Orange indicator
Replace a new battery: Red indicator
Note
•
Make sure to use only the AC power adapter specified for the camera. Damage caused
by the use of an incorrect adapter is not covered under the warranty.
•
When the charging is not started even if proceeding the operation above. Press power
button on at any mode after LCD indication appears, then turn the power off.
•
Do not place the camera in hot temperature. Use it at room temperature.
1.
!
Make sure the camera is off.
2.
!
Slide the battery/SD Memory Card cover in the
direction of the [OPEN] arrow.
3. ! Insert an SD Memory Card :
•
The front side of the memory card(printed arrow)
should face towards the front side of the camera.
•
If the card cannot be inserted, check the orientation.
4.
!
Close the battery/SD Memory Card cover.
•
To remove the SD Memory Card, make sure
!
the
camera is off. Open the battery/SD Memory Card card cover.
Press lightly on the edge of the memory card and it will eject.