BenQ AU2000, Руководство пользователя

Страница: 27 / 35

Operations 26
Switching to a Preset Channel
Once a channel has been set you can quickly switch to the channel from
either the knob located on the front of the speaker, the remote control, or
the treVolo A app.
Switching to a preset channel from the speaker
Turn the knob on the speaker to the channel you want to listen to. The ring
at the edge of the control panel will display which channel is currently
selected.
Switching to a preset channel from the remote
control
Press the preset channel button corresponding to the channel you want to
listen to. The ring at the edge of the control panel will display which channel
is currently selected.
Switching to a preset channel from the treVolo A
app
Select the channel you want to listen to from the “My channel” menu or the
“My channel” box after swiping right from the left edge of the main speaker
menu or selecting at the top left corner. The ring at the edge of the
control panel will display which channel is currently selected.
Grouping Speakers
In a setting where there are multiple treVolo A speakers connected to the
same network, you can sync up playback so that each speaker is playing the
same music at the same time by grouping speakers together in the treVolo A
app. To group speakers together follow the instructions below.
If a channel is set to an audio source that is currently unavailable or not connected the
channel will only be accessible when the source becomes available again or is
reconnected.
1. Enter the speaker menu in the treVolo A app.
2. Select the
button at the top right corner of the speaker menu. The
Group speakers pop-up menu will appear.
3. Give a name to the group.
4. Check the boxes next to the speakers you want to group together, then
select OK.