BenQ 9H.Y1277.000 Скачать руководство пользователя страница 14

Страница: 14 / 96

Local Keyboard Description (Detailed description refer to SW Specification)

Key Name

Detailed Description

Power

Use this button to turn your Data Projector on and off (standby mode).

Source

To select input sources as Computer, Video, S-Video, YpbPr

Auto

Toggle auto-tracking image function

Blank

Press “Blank” key first to blank the screen

Mode/Enter

(1) When there is no OSD menu, this bottom is Mode hot key; user would press
this bottom to choose one of preset modes

(2) When there is confirm message, user could press this key to confirm

Menu/Exit

Press this key to open/exit the OSD menu

Right/Panel Key

Lock

(1) When user press the bottom once, it will enter “Panel Key Lock” setting

(2) When panel key is locked, user could press this key for 3 seconds to release
Panel Key Lock
(3) When there is OSD menu, user can press this key to move to right item

Left/Q?

(1) When user presses the bottom once, it would show main "Information"
menu; and then user could press

▲▼

to choose questions group.

(2) If there is OSD menu, user can press this key to move to the left item

(1) Move item bar. (2) Move to page level. (3) K.

Down

(1) Move item bar. (2) Move to page level. (3) Keystone-.

Remote Control Keys Description (Detailed description refer to SW Specification)

IR-Key Name

Detailed Description

Power

Use this button to turn your Data Projector on and off (standby mode).

Source

To select input sources as Computer, YPbPr , Video, S-Video

Menu/Exit (1)

OSD pop-up. (2) Move next item

/ Panel Key Lock

(1) When user press the bottom once, it will enter “Panel Key Lock” setting

(2) When panel key is locked, user could press this key for 3 seconds to release

Panel Key Lock
(3) When there is OSD menu, user can press this key to move to right item

/ Q?

(1) When user presses the bottom once, it would show main "Information"
menu; and then user could press

▲▼

to choose questions group.

(2) If there is OSD menu, user can press this key to move to the left item

(1) Move item bar. (2) Move to page level. (3) K.

(1) Move item bar. (2) Move to page level. (3) Keystone-.

Auto

Toggle auto-tracking image function

Mode/Enter

(1) When there is no OSD menu, this bottom is Mode hot key; user would press

this bottom to choose one of preset modes
(2) When there is confirm message, user could press this key to confirm

Freeze

This button will freeze a picture. Press again to resume motion.

Blank

Press “Blank” key first to blank the screen.

Timer

Call out the “Presentation Timer” setup OSD and user can set timer to remind
presenter.

Digital Zoom in

By press this key, the center of picture can be magnified gradually.

Digital Zoom out

By press this key, the size of the magnified image will be reduced.

External Status indicator

LED Name

Detailed Description

Power LED

Display the power on/off sequence status

Lamp Status LED

Display the Lamp status (Lamp fail, Lamp spoil etc.)

Temperature Status LED

Display the Thermal status (Fan Fail, Over Temperature, etc.)

Содержание 9H.Y1277.000

































































































Результаты поиска

Содержание 9H.Y1277.000

Отзывы:

Бренды по названию

Популярные бренды

BenQ 9H.Y1277.000, Руководство по обслуживанию изделия

Результаты поиска

Содержание 9H.Y1277.000

Отзывы:

Бренды по названию

Популярные бренды