Benning 044103, Краткие инструкции

Страница: 6 / 24

BENNING IT 130 short instructions
- 6 -
1.2 Front and connector panel
Legend:
1 LCD

128 x 64 dots matrix display with backlight.
2 UP

Modifies selected parameter.
3 DOWN
4 TEST

Starts measurements.
Acts also as the PE touching electrode.
5 ESC

Goes one level back.
6 TAB

Selects the parameters in selected function.
7 Backlight, Contrast

Changes backlight level and contrast.
8 ON/OFF

Switches the instrument power on or off.
The instrument automatically turns off 15 minutes after
the last key was pressed.
9 HELP/CAL

Help function with connection diagrams
(press for approx. 2 seconds for R LOW and ΔU)

For calibrating the test cables in the R LOW and
CONTINUITY function

Starts the Z
REF
measurement in the sub-function
ΔU voltage drop
10
Function selector
switch

Selects test function.
11 MEM

Stores / recalls memory of instrument.

Stores the settings of the current clamp adapter
12 Green LEDs
Red LEDs

Indicates PASS / FAIL of result.