BENNING IT 130
short instructions
- 14 -
2 Measurements
2.1 Null balance (compensation) of the test cables
1. Set function
R LOW
Select R LOW
or CONTINUITY.
Short-circuit the test cables.
Shorted test leads
3. Press the key
.
4. Press the key CAL
(HELP).
After performing test leads compensation first measured value and then 0.00
is displayed.
Successful compensation is displayed by means of the
symbol in the
"R LOW"
and
"CONTINUITY"
function.
Resistance of the test cable before
compensation
Resistance of the test cables after compensation
