Benefon SERAPH NT Скачать руководство пользователя страница 7

Страница: 7 / 56

MECHANICS AND ENVIRONMENTAL EFFECTS 7

PART A: GENERAL

PART A: GENERAL

MECHANICS AND ENVIRONMENTAL

EFFECTS

Sight

The device must have an unobstructed view to satellites at
any time.

The device can be used like a standard GSM phone. In some
cases, the device can be built in clothes or special vests.

If the device is mounted somehow, it must be attached to
the surface so that the back of the device is facing up. To en-
sure proper functioning of the GPS, the GPS antenna can be
covered with plastic, fiber glass or clothes, but not with met-
al.

In marginal conditions an external GPS antenna, possibly
even a GSM antenna, must be installed.

Temperature ranges

•

Usage

: -20 to +55 °C with a standard Li-Ion battery

•

Charging

: Standard Li-Ion battery must not be charged

below °0. Likewise, charging above +55 °C is prevented.

At temperatures below -25 °C, or above +60 °C, the battery
will not supply power and the device cannot be used.

Upon warming up/cooling down, the device will function
properly again.

Mechanical durability

The device is dust and splash proof. The protection category
for the device is IPX4.

To meet these requirements, the rubber seal must be insert-
ed in place correctly.

BENEFON SERAPH OPERATING INSTRUCTIONS

Содержание SERAPH NT
























































Результаты поиска

Содержание SERAPH NT

Отзывы:

Бренды по названию

Популярные бренды

Benefon SERAPH NT, Руководство по эксплуатации

Результаты поиска

Содержание SERAPH NT

Отзывы:

Бренды по названию

Популярные бренды