Benefon SERAPH NT, Руководство по эксплуатации

Страница: 30 / 56

PART B: CONFIGURING SETTINGS FOR THE SERAPH
30 CODE SETTINGS
CODE SETTINGS
Automatic PIN entry
The PIN code can be stored to the EEPROM of the device. It
cannot be read by any means from the device. In startup the
PIN code is entered automatically by the device software.
To store the PIN code, select Save PIN code from the Mobile
menu. Key in the new code and confirm it.
To change the PIN code, select Change PIN code from the
Mobile menu. Key in the new code and confirm it.
NOTE: The PIN entry option is available only when the de-
vice is connected to the software. After storing the PIN code,
make sure to transfer the setting to the device.
Security code
The security code can be set to secure Waypoint tracking
and/or Seraph settings . If the setting is enabled, the code is
requested each time when powering on the system (Be-
newin software in connection with the device).
The security code settings are located in the Mobile menu.
•You can secure both settings, one of them, or none of
them. To attach the code to the setting, check the box -
otherwise leave the check box blank (1). Click
Ok .
•To change the code, first click the corresponding box (2).
Key in the old code, key in the new code and confirm it
(3). Click
Ok (4).
1
3
2
4