Benefon ESC, Руководство пользователя

Страница: 129 / 169

GPS MENU: WAYPOINTS 123
1. Select a waypoint from the list and press
-
SE-
LECT
.
2. Select Set as destination and press
-
OK
. .
SETTING POSITION
You can trick the phone into believing that the se-
lected waypoint is your current position. This is
useful e.g. when you want to use the map while
conserving the battery by not having the GPS on, or
when you want to speed up the initial position cal-
culations of the GPS.
1. Select a waypoint from the list and press
-
SE-
LECT
.
2. Select Set as position and press
-
OK
.
This option is only available when the GPS module
is not active or has no valid position.
SENDING SMS WITH COORDINATES
You can send the coordinates of a waypoint as a
part of a short message.
1. Select a waypoint from the list and press
-
SE-
LECT
.
2. Select SMS with coords and press
-
SELECT
.
3. You can now enter a short message to accom-
pany the coordinates. This can be done the
same way as writing any short message. For fur-
ther information, please see the chapter
GSM
menu, Messages, Write message .
SENDING A WAYPOINT
You can send a waypoint to another Benefon ESC!
phone.
1. Select a waypoint from the list and press
-
SE-
LECT
.
2. Use
n
to select
Send waypoint
and press
-
SE-
LECT
.
3. Key in the receiver´s phone number, using nu-
meric keys and
.
CLEAR
, or select a number
from the phone book.
To recall a phone number from the phone
book, please do as follows:
•Clear any numbers by pressing and hold-
ing
.
CLEAR
for a few seconds.
•Press
-
SEARCH.
If desired, key in the ini-
tials of the name.
•Press
-
READ
.
UBER-1017 - Page 129