BendPak RS7580V-601, Инструкция по установке и эксплуатации, Страница: 3 / 44

RS7580V-601 Rotary-Screw Air Compressor
3
P/N 5900090 — Rev. A — Sept. 2019
Table of Contents
Introduction 3 Installation 13
Shipping Information 4 Operation 23
Safety Considerations 4 Maintenance 32
Components
6 Troubleshooting 36
FAQs 8 Wiring Diagram 37
Specifications 9 Labels 38
Important Electrical 10 Parts Diagram 41
Installation Checklist 12 Maintenance Log 43
Introduction
This manual describes the Hush-Quiet RS7580V-601 Rotary-Screw Air Compressor, which efficiently
and reliably creates, stores, and distributes pressurized air for your facility. Pressurized air can be used
to power pneumatic tools, operate spray equipment, inflate tires, and many other things.
More information about the full line of BendPak products is available at
bendpak.com .
This manual is mandatory reading for all RS7580V-601 users, including anyone who sets up, operates,
maintains, or repairs it.
⚠
DANGER Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
If you are having issues, refer to the
Troubleshooting
section of this manual for assistance.
Technical support and service is available from your dealer, on the Web at bendpak.com/support ,
by email at techsupport@bendpak.com , or by phone at (800) 253-2363 , extension 196.
You may also contact BendPak for parts replacement information (please have the model and serial
number of your unit available) at
(800) 253-2363 , extension 191.