BendPak RS7580V-601, Инструкция по установке и эксплуатации, Страница: 17 / 44

RS7580V-601 Rotary-Screw Air Compressor
17
P/N 5900090 — Rev. A — Sept. 2019
Clearance
The Compressor has two clearance zones:
•
Ventilation/Maintenance . Always keep at least 3.3 feet / 1 meter completely clear around the
Compressor, even if it is in a corner or against a wall. This ensures an unobstructed flow of air to
the Compressor and allows adequate space for maintenance.
Required .
•
Safety Exclusion Zone
. BendPak strongly recommends keeping 6.6 feet / 2 meters clear
around the Compressor for safety purposes. Only trained personnel should be allowed in the
Safety Exclusion Zone; nothing else —no half-finished projects, no wires or cables, no storage,
no chemicals, no things you’re going to get to next week.
Strongly recommended .
⚠
DANGER
When you even hear the words “air compressor,” you need to remember that being
in close proximity to one is a serious endeavor with potentially life-threatening risks.
The Compressor can start without warning. An accidental quarter turn on a ball
valve can unleash pressurized air at potentially dangerous levels. Only allow trained
personnel near the Compressor.
Do not assume you are going to be safe
this time just because nothing happened last time
.
Top view. Not necessarily to scale. Not all components shown.
The Safety Supervisor at the facility should implement appropriate written policies and physical
safeguards including, if possible, a physical barrier around the Safety Exclusion Zone.