BendPak RS7580V-601, Инструкция по установке и эксплуатации, Страница: 4 / 44

RS7580V-601 Rotary-Screw Air Compressor
4
P/N 5900090 — Rev. A — Sept. 2019
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment
before
you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition.
Do not sign the bill of lading until
after
you have inspected the shipment.
If any of the
items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier
makes a notation on the bill of lading that lists the missing and/or damaged goods.
If you discover missing or damaged goods
after
you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs. Our willingness to assist in helping you process your claim
does not make us responsible for collection of claims or replacement of lost or damaged materials.
Safety Considerations
Read this manual carefully before using your new product.
Do not set up or operate
the product until you are familiar with
all
operating instructions and warnings. Do not allow anyone
else to operate the product until they are also familiar with all operating instructions and warnings.
⚠
DANGER
When you even hear the words “air compressor,” you need to remember that being
in close proximity to one is a serious endeavor with potentially life-threatening risks.
The Compressor can start without warning. An accidental quarter turn on a ball
valve can unleash pressurized air at potentially dangerous levels. Only allow trained
personnel anywhere near the Compressor.
Do not assume you are going to
be safe this time just because nothing happened last time
.
General Safety Information
• The product is a Rotary-Screw Air Compressor. Use it only for its intended purpose.
• Do not make any modifications to the Compressor. If you do, you void your warranty.
• Do not override, remove, or disable Compressor safety features or components; they are there for
your safety. Do not use the Compressor if safety features or components have been overridden,
removed, disabled, or damaged.
• The Compressor must
only
be operated by authorized personnel. Take
active measures
to
keep untrained personnel away from the unit.
• You must wear OSHA-approved (publication 3151) personal protective equipment at all times
when installing, using, maintaining, or repairing the Compressor: leather gloves, steel-toed work
boots, eye protection, back belts, and hearing protection.
• When the product is in use, keep away from it. Only the Operator should be within 30 feet.
• Make sure all Operators read and understand the
Installation and Operation Manual
. Keep the
manual near the device at all times.
• Make a visual inspection of the unit on a
daily
basis. Check for damaged or missing parts. Do not
use the product if you find any issues. Instead, take it out of service, then contact your dealer,
email
techsupport@bendpak.com , visit bendpak.com/support , or call (800) 253-2363 .