BENDIXKing E Series Lawrence, Руководство по программированию

Страница: 23 / 29

SPECIAL CLONING INSTRUCTIONS
It is possible to change Channel 0 values on the Master radio, hold
them in a temporary memory, and download them to the clone
without actually entering them into the permanent memory of the
Master radio.
This is convenient for sequential identification
numbers used to identify a series of portables in a radio system.
Assuming that the frequencies, Code Guard values, and other Ch
0 values are common for all radios in the system, but that the radio
identification number should be unique to each radio, the following
method would be used to clone additional radios for the system.
1. Program the Master radio with all
frequencies, Code Guard values, and
Channel 0 values that will be common
to all radios.
2. Advance the display to show the
Master radio’s ID number -. for
example, 100.
3.
Press the [CLR] key; press 1 25.
Do
not press the [ENT] key. Now 125 is
in temporary memory.
4. Press the [*] key, connect the cable to
the radio and download by pressing
the
[FCN] key. ID number 125 is now
stored in permanent memory of the
clone.
5. After download, press the [CLR] key.
Disconnect the clone. The Master
radio display will show that 125 is still
being held in the temporary memory
of the Master radio.
22 BENDIX/KING