BENDIXKing E Series Lawrence, Руководство по программированию

Страница: 12 / 29

D . DTMF ENABLE
NOTE: When functions 4 and 5 are both
enabled (flashing) the ANI tone sequence
will be transmitted only after the [ENT] key
is pressed while the transmit PTT switch is
activated. A sidetone of the ANI number
transmitted will also be heard through the
speaker.
When function 5 is enabled (flashing) the
keypad becomes active for manual DTM F
operation.
E . STORE GROUP TWO SETTINGS
Once Group Two functions are set, press the [ENT] key to store
them into memory and automatically advance the program to the
next section. Alphanumeric displays advance to Group Three
settings. Standard 7-Segment displays go back to the starting point
for Channel 0 settings.
Once each function l-5 is set as desired, you can store t he changes,
discard the changes, or disable all 5 functions.
Press the [CLR] key to disable all Group Two functions (steady).
Press the [ENT] key to store new Group Two settings into memory
and advance to the next section.
Press the [FCN] key to advance to the next section without saving
changes or if the new settings are only to be cloned, not stored
locally.
NOTE: If programmed settings are to be cloned (not stored locally)
proceed with the cloning procedure before advancing to the
next section. Otherwise, these settings will be lost. See
‘Cloning Radio Settings” on page 20.
NOTE: Group Three settings, Alphanumeric display functions,
group labels, and channel labels cannot be transferred by
cloning.
Keyboard Programming
11