BACKLIGHT DURATION
Display backlighting is available only with
Alphanumeric displays.
After Group Three functions, the LCD
displays the current backlight duration
setting. Available settings are
LITE OFF,
1
SEC
ON, one second increments up to
6
SEC
ON, and
LITE ON.
If no change is needed, press the
[FCN]
key to advance to the next section.
Press the
[CLR]
key to set backlight
duration to zero and display
LITE OFF.
Press the
[PRI]
key to increase backlight
duration by 1 second increments from
LITE OFF,
to 1
SEC ON, 2,3,4,5,6 SEC
ON, LITE
ON (illumination remains on
constantly) then back to
LITE OFF.
NOTE:
The backlight illuminates for the
duration of the new setting. For
example, if you press the
[PRI]
key to
change the setting from 2
SEC ON
to
3
SEC
ON the backlight immediately
illuminates for three seconds.
NOTE:
Excessive battery drain will result
if
LITE
ON is set and used for extended
periods of time.
Press the
[ENT]
key to store changes and
advance to the next function.
Press the
[FCN]
key to advance to the
next function without storing changes.
14
BENDIX/KING
Содержание E Series Lawrence
Страница 1: ......
Страница 27: ...NOTES 26 BENDIX KING...
