2
LifeGuard®
LG
2-
Series
LifeGuard® Protection Panels
This document is intended as a reference guide for installing and using a Bender LifeGuard®
LG
2-
series protection panel. This document includes installation, setup, and usage
instructions.
Only qualified maintenance personnel shall operate or service this equipment. These
instructions should not be viewed as sufficient for those who are not otherwise qualified to
operate or service this equipment. This document is intended to provide accurate
information only. No responsibility is assumed by Bender for any consequences arising
from use of this document.
Use of this document
This quick start applies to standard LifeGuard models with
lighted
push button front
panels
,
as pictured above
, as well as open panels with no enclosure
.
Standard model
Installation
M
ounting - NEMA 4X Polycarbonate Enclosure
(enclosure code P)
The standard enclosure for LifeGuard protection panels is NEMA 4X polycarbonate. The en-
closure includes mounting feet and separate instructions on wall-mounting the enclosure.
Refer to these instructions for more information. Refer to
the
figure
and table
below for
dimensions.
Figure 1 - Dimensions of NEMA 4X polycarbonate enclosure
Table 1: Enclosure dimensions in inches (mm)
