Bender ISOMETER iso1685FR, Руководство пользователя

Страница: 9 / 52

Important information
9 iso1685FR(M)_D00002_02_M_XXEN/06.2017
1.3 Training courses
Bender is happy to provide training regarding the use of test equipment.
The dates of training courses and workshops can be found on the Internet at
www.bender-de.com -> Know-how -> Seminars.
1.4 Delivery conditions
Bender sale and delivery conditions apply.
For software products, the "Softwareklausel zur Überlassung von Standard-Software als Teil von Lieferungen,
Ergänzung und Änderung der Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroin-
dustrie" (software clause in respect of the licensing of standard software as part of deliveries, modifications and
changes to general delivery conditions for products and services in the electrical industry) set out by the ZVEI
(Zentralverband Elektrotechnik- und Elektronikindustrie e.V.) (German Electrical and Electronic Manufacturers'
Association) also applies. Amending the “General Conditions for the supply of Products and Services of the
Electrical and Electronics Industry” (GL)* Sale and delivery conditions can be obtained from Bender in printed
or electronic format.
1.5 Storage
The devices must only be stored in areas where they are protected from dust, damp, and spray and dripping
water, and in which the specified storage temperatures can be ensured.
1.6 Disposal
Abide by the national regulations and laws governing the disposal of this device. Ask your supplier if you are
not sure how to dispose of the old equipment.
The directive on waste electrical and electronic equipment (WEEE directive) and the di-rective on the restriction
of certain hazardous substances in electrical and electronic equipment (RoHS directive) apply in the European
Community. In Germany, these po-licies are implemented through the "Electrical and Electronic Equipment
Act" (ElektroG). According to this, the following applies:
• Electrical and electronic equipment are not part of household waste.
• Batteries and accumulators are not part of household waste and must be disposed of in accordance
with the regulations.
• Old electrical and electronic equipment from users other than private households which was introdu-
ced to the market after 13 August 2005 must be taken back by the manufacturer and disposed of pro-
perly.
For more information on the disposal of Bender devices, refer to our homepage at
www.bender-de.com -> Service & support.