Bender COMTRAXX MK2430, Руководство пользователя

Страница: 49 / 84

Operation
49 MK2430_D00129_02_M_XXEN/09.2019
7.2 Quick-start guide
The illustrations below serve as examples.
7.2.1 Display in fault-free operating condition
There are no warnings or alarms pending.
 
The green "Normal" LED is lit.
 
The LC display shows the programmed standard display.
 
A maximum of 3 measured values can be displayed in lines 1…3.
– Line 1…3: user-definable standard display text.
– Line 4 status bar, indicates the time of day (can be switched off).
7.2.2 Display in fault condition
A warning or an alarm message is pending.
 
Depending on the type of fault, either the yellow "Warning" LED or the red
"Alarm" LED will light up. The green "Normal" LED goes out.
 
At the same time the buzzer sounds. If the cause of fault cannot be remedied
immediately, the buzzer can be muted by pressing the "
" (5) button.
 
The LC display shows details about the message.
– Line 1: Standard display: "System:"
User-defined text here: "Intensive care unit 03"
– Line 2…3: Message text, with measured value (if applicable)
Power supply: OK
Med. gases: OK
09:50
Intensive care unit 03
Insulation fault
Measured value 43 k
Ω
xx/yy zzz 09:50