Bender COMTRAXX MK2430, Руководство пользователя

Страница: 38 / 84

Commissioning and testing
38 MK2430_D00129_02_M_XXEN/09.2019
5.1 Tests before switching on
Is the supply voltage
properly connected?
Does the MK2430 use the
correct supply voltage
(see device nameplate)?
Are terminating resistors
installed correctly at the
beginning and end of the
BMS bus and switched
no
Provide the appropriate
operating voltage.
Connect the supply
voltage properly.
Is the BMS bus properly
connected?
no
Connect the BMS bus
properly and check
polarity of the terminals
Install the terminating
resistors properly or
switch them on (use the
DIP switch at MK2430
yes
yes
yes
MK2430-11 only: Do the
digital inputs have the
correct voltage?
Make corrections
yes
MK2430-11 only: Are the
digital inputs connected
properly?
Make corrections
yes
Are the other devices
connected correctly?
Make corrections
yes
yes
Are the addresses on all
devices correctly set
according to the plan?
Make corrections. You
may have to switch the
supply voltage on.
yes
Are the rules specified in
the "BMS bus" instruction
leaflet adhered to ?
Make corrections
yes
Are all devices in the
system up to date?
Update the respective
device.
yes
Switch voltage supply on.
Then proceed with "tests
after switching on"."
no
no
no
no
no
no
no
no