Bend-Tech DRAGON A150, Техническое обслуживание и устранение неисправностей

Страница: 51 / 78

51 Bend-Tech Dragon A150 Troubleshooting Guide
X and Y Axis Maintenance
11
11
X and Y Axis
Maintenance
X and Y Axis Maintenance and Adjustment
Maintaining specific mechanical aspects of the Dragon A150 is critical to achieving accurate
operation. The machine relies on numerous set screws and adjustments regarding its
operational axes. Maintaining set screws and drive systems adjustments is critical to the
accurate operation of the machine. The Operator should ensure set screws, gears and chains
are kept in adjustment.
Symptom Cause Corrective Action
X chatter
Cause
X chain drive gear
Install revised X chain drive gear;
check X drive chain tension; ensure
anti-chatter kit is installed.
Y motor not holding
torque
Y drive chain tension too
tight
Adjust Y chain motor mount plate to
correct chain tension.
Material too heavy
Check material weight, ensure it is
within machine capabilities.
Gate sticking, not
functioning correctly
Check Gate, clean Gate to restore
function. If necessary, service Gate to
ensure all parts are operating properly.
Trolley not moving
smoothly along the Rail
Trolley roller system not
adjusted properly
Adjust Trolley roller system so the
Trolley has no play and travels
smoothly along the Rail.
Rail dirty
Clean and wipe down Rail, coat with
rustproofing oil such as WD-40 or
penetrating oil.