Bend-Tech DRAGON A150, Техническое обслуживание и устранение неисправностей

Страница: 40 / 78

40 Bend-Tech Dragon A150 Troubleshooting Guide
Laser
07
Laser Replacement
The Laser is a consumable and over time it can fail. If the Operator has determined the Laser
has failed, it will be necessary to replace the Laser. The Laser is affixed to the Torch mounting
collar. The Laser will connect to the Control Box via a two prong plug. The type of plug will
depend on the age of the machine.
1. Loosen the set screw that secures the Laser to the Torch mounting collar. Depending on
the age of the machine this may require a 3/32 in. Allen wrench or 5/16 in. wrench.
2. Remove the Laser, remove the Laser cord from the wire loom. This may require cutting zip
ties that secure the loom to the machine.
3. Unplug the Laser cord from its Control Box connection.
4. Plug in the new Laser.
5. Route the Laser cord in the same fashion the old Laser cord was routed, placing the cord
inside the wire loom. Reattach the wire loom to the machine with zip ties.
6. Place the Laser in its mount in the Torch mount collar. Secure with set screw.