19
THE INSTALLER MUST INFORM THE CUSTOMER OF THE FOLLOWING TO COMPLETE THE INSTALLATION
Demonstrate the lighng of the appliance and the controls to select the heat seDngs. Demonstrate how to exnguish the
fire.
Demonstrate the removal of the trim and marble access cover and how to reinstall correctly.
Demonstrate the locaon of the ba#ery igniter and how to replace the ba#ery. (AA type)
Discuss the removal and reinstallaon of the glass and the ceramics. Explain how they should be cleaned and make the
customer aware of the health and safety warning detailed on page 20.
Explain to the customer that the ceramics are fragile and must be treated with great care, explain that the ceramics are
not covered by the warranty because of their fragility. Also explain that small hairline cracks will appear in the surface of
the ceramics due to heat expansion and contracon—this is perfectly normal.
During the first several hours of use an odour will be experienced—this is normal and is the starch used in the
manufacturing of the ceramic fuel bed, paints curing and oils remaining on some metal components that will burn off. This
odour is non toxic and will eventually disappear a0er a few hours of use.
Advise that no rubbish should be thrown onto the appliance and that the appliance should be cleaned regularly.
Advise that the glass panel is very hot when running and that the trim and/or marble access cover should not be removed
unl the appliance has been allowed to cool for at least 30 minutes.
A vacuum cleaner should be used to regularly clean behind the marble access cover to prevent lint gaining access to the
appliance, in parcular the pilot.
Advise the customer that the appliance should be serviced annually by a
GAS SAFE
engineer to ensure the safety and
integrity of the appliance.
Advise the customer that the appliance has a very hot surface and therefore it is essenal that a suitable fireguard be used
for the protecon of the elderly, infirm and young children. This fireguard should conform to BS8423 : 2002 (Fireguards for
use with Gas Heang Appliances).
These instruc ons must be handed over to the customer once installa on is complete.
COMPLETING THE INSTALLATION
