background image

 

 

 

 

 

 

 

Electrical Connections - UK Plug Wiring Instruction 

 

·

  If the plug has to be changed because it is not suitable for your socket, or due to damage, please follow the wiring 

instructions shown below. 

 

·

 

The wires in the mains lead are coloured in accordance with the following code:

 

BROWN   

 

          :   

LIVE (L) 

BLUE     

 

          :   

NEUTRAL (N) 

GREEN / YELLOW       :   

EARTH (E) 

 

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying 

the terminals in your plug, please adhere to the following: 

 

·

  The BLUE wire is the NEUTRAL and must be connected to the terminal which is marked with the letter N or coloured 

BLACK. 

 

·

  The BROWN wire is the LIVE and must be connected to the terminal that is marked with the letter L or coloured RED. 

 

·

  The wire which is coloured GREEN / YELLOW must be connected to the terminal which is marked E or the earth symbol 

  or coloured GREEN or GREEN / YELLOW. 

 

·

  Always ensure that the cord grip is positioned and securely fastened. 

 

·

 

WARNING

: THIS APPLIANCE MUST BE EARTHED.   

 

·

 

If a 13A (BS1363) fused plug is used it must be fitted with a BS1362 13A fuse. If in doubt consult a qualified electrician. 

 

 

 

 

 

 

 

 

 

 

 

 

                                   

 

 

 

                   

 

 

Содержание 2599M










Отзывы: