The Beltronics Vector 928i is the most
advanced radar, laser and safety detector
ever designed by Beltronics.
The Bel V928i includes full X, K,
SuperWide Ka, and Safety Warning System
radar capability, front and rear laser
detection, varactor-tuned (VTO) microwave
receiver, digital signal processing (DSP)
for superior range and reduced false
alarms, our patented Mute and AutoMute,
audible and visual band alerts, and all the
performance you’d expect from Beltronics.
In addition, the Bel V928i introduces
the following revolutionary features:
• Varactor-tuned receiver provides
long-range protection against all
radar threats
• New easy-to-use Programming lets
you customize up to 6 features
• Ultra-bright text-display provides
easy to read information from any
angle
• Detects and decodes Safety Warning
System messages
If you’ve used a radar detector before,
a review of the Quick Reference Guide on
pages 4 and 5, and the Programming
information on pages 12 and 13 will briefly
explain the new features.
If this is your first detector, please read
the manual in detail to get the most out of
your V928i’s outstanding performance and
innovative features.
Please drive safely.
Congratulations
Quick Reference
1
Programming Details
Factory Default Settings
To reset your V928i to its original factory settings,
press and hold the “CITY” and “BRT” buttons while
turning the power on. The V928i’s display will
provide a
Reset
message, accompanied by an
audible alert, acknowledging the reset.
An example
Here is how you would turn the V928i’s AutoMute
feature off.
1
Enter the Program Mode by holding both the CITY
and BRT buttons down for 2 seconds. The
V928i will
beep twice and display
Program
.
2
Then hold the RVW button down.
V928i will scroll
through the categories, starting with Display (
Pilot
),
then Voice (
Voice
), then Power-On sequence (
PwrOn
),
and then AutoMute (
aMute
).
3
Release the RVW button when the V928i shows the
AutoMute item.
Since the factory setting is for
AutoMute to be on, the V928i will display
aMute ON
.
If you accidentally don’t release the Review button
in time, and the V928i goes to the next category, hold
the RVW button down again, and after the V928i
scrolls through all categories, it will begin again at
the top of the list.
4
Press the CHG button to change from
aMute ON
to
aMute OFF
.
5
To complete the Programming, simply wait 8
seconds without pressing any button.
The V928i will
display
Complete
, beep 4 times, and return to
normal operation.
FCC Note:
Modifications not expressly approved
by the manufacturer could void the
user’s FCC granted authority to operate
the equipment.
There are 6 user-selectable options so you can
customize your V928i for your own preferences.
The buttons labeled CITY and BRT are also used to
enter the Program Mode, REVIEW your current
program settings, and to CHANGE any settings as
desired. The words PGM, RVW and CHG are located on
the top of the detector, and are highlighted in graphics.
How to use Programming
1
To enter Program Mode, press and hold both
CITY and BRT buttons down for 2 seconds.
The
unit will beep twice, and will display the word
Program
.
2
Then press the RVW button to review the
current settings
. You can either tap the button to
change from item to item, or hold the button to scroll
through the items.
3
Press the CHG button to change any setting.
You can either tap the button to change from setting to
setting, or hold the button to scroll through all the
options.
4
To leave Program Mode, simply wait 8 seconds
without pressing any button.
The unit will display
Complete
, beep, and return to normal operation.
Register
online:
@
www.beltronics.com
