Belmash MCS-400, Руководство по эксплуатации

Страница: 13 / 64

EN
13
BELMASH MCS-400
1. GENERAL INFORMATION
The machine is intended for industrial and household use.
The machine is designed for cutting the construction materials like: porous, cellular, haydite or
aerated concrete in order to obtain materials of required shape and size.
Machine arrangement provides convenient manual or vehicle transportation.
Operation is allowed in open areas, under shelter, indoors, except for living quarters.
The machine should be operated in the following conditions:
• elevation above sea level – up to 1000 m;
• ambient temperature – from -5°C to +40°C;
• relative air humidity – not more than 80% at a temperature of +20°C.
When adjusted properly, the machine can provide the following processing modes:
• longitudinal cutting;
• cross cutting;
• down edging (rebating);
• angle cutting using angle device;
• edge cutting (chamfering) using chamfering tool.
The power of the machine is supplied by a single-phase AC with an earthed positive earth.
Type of engine – asynchronous, single-phase, with the working capacitor, intermittent
operating status – S6-40%.
The equivalent and maximum sound levels are as follows: 80 dBA and 90 dBA relatively.
The machine has a built-in disconnect device from the power supply during asynchronous
engine overheating. Restarting of the machine can be performed after the electric motor has
cooled down to the ambient temperature.
The machine has pipe 4 with a diameter of 100 mm (fig. 1) mounted instead of cover 39 (fig. 6)
for connection of external exhaust devices for saw dust collection.
Machine serial number decoding:
S014A.0117.0200
Machine ordinal
number
Article
Month, year of
manufacture