15
FCC Requirements
Federal Communications Commission Requirements
This equipment complies with Part 68 of the FCC Rules. A label on the
BASE UNIT
of this equipment
contains, among other information, the ACTA product number and the Ringer Equivalence Number
(REN) for this equipment. You must, upon request, provide this information to your telephone
company.
The REN is also useful in determining the quantity of devices that you may connect to your
telephone line and still allow these devices to ring when your telephone number is called. In most
areas, but not all, the sum of the RENs for all devices connected to one line should not exceed five
(5.0). To be certain of the number of devices that you may connect to your line, you should contact
your local telephone company.
If your equipment should cause harm to the telephone network, the telephone company may
temporarily disconnect your service. If possible, they will notify you in advance that temporary
discontinuance of service may be required. However, when advanced written notice is not
possible, the telephone company may temporarily discontinue service without notice if such action
is necessary under the circumstances. The telephone company may make changes in its
communication facilities, equipment, operations, or procedures where such action is reasonably
required in the operation of its business and is not inconsistent with the rules and regulations of
the Federal Communications Commission.
Do not attempt to repair or modify this
equipment.
WARNING:
Changes or modifications not expressly approved by the party responsible for its
compliance could void the user’s authority to operate the equipment.
Some cordless telephones operate at frequencies that may cause interference to nearby TVs and
VCRs. To minimize or prevent such interference, the
BASE UNIT
of the cordless telephone should
not be placed on or near a TV or VCR. If interference is experienced, moving the cordless
telephone farther away from the TV or VCR will often reduce or eliminate the interference.
This equipment should not be used on coin telephone lines. Connection to party line service
is subject to state tariffs. If trouble is experienced, disconnect this equipment from the telephone
line to determine if it is causing the malfunction. If the equipment is determined to be
malfunctioning, its use should be disconnected until the problem has been corrected.
IMPORTANT
The AC ADAPTOR must always be
plugged into an electrical outlet.
