background image

14

Technical Information

Technical Information

This  cordless  telephone  uses  radio  frequencies  to  allow  mobility.  There  are  certain difficulties
in using radio frequencies with a cordless telephone. While these are normal, the following could
affect the operation of your system.

Noise

Electrical pulse noise is present in most homes at one time or another. This noise is most intense
during electrical storms. Certain kinds of electrical equipment such as light dimmers, fluorescent
bulbs, motors, and fans also generate noise pulses. Because radio frequencies are susceptible to
these noise pulses, you may occasionally hear them in your 

HANDSET

. Generally they are a minor

annoyance and should not be interpreted as a defect in your system.

Range

Because radio frequency is used, the location of the 

BASE UNIT

 can affect the  operating range.

Try several locations in your home or office and pick the one that gives you the clearest signal to
the 

HANDSET

.

Interference

Electronic circuits activate a relay to connect the cordless telephone to your telephone line. These
electronic circuits operate in the radio frequency spectrum. While several protection circuits are
used to prevent unwanted signals, there may be periods when these unwanted signals enter the

BASE UNIT

. You may hear clicks or hear the relay activate while you are not using the 

HANDSET

.

If the interference occurs frequently, it can be minimized or eliminated by relocating the 

BASE UNIT

.

You can check for interference before selecting the final 

BASE UNIT

 location by plugging in the

phone.

NOTICE:

This cordless telephone uses radio communication between the 

HANDSET

 and the 

BASE UNIT

 and

may not ensure privacy of communication. Other devices, including other cordless telephones,
may interfere with the operation of this cordless telephone or cause noise during operation. Units
not containing coded access may be accessed by other radio communication systems. Cordless
telephones must not cause interference to any licensed radio service.

IMPORTANT

If you live in an area which receives frequent

thunderstorms, we strongly recommend plugging

your AC ADAPTOR into a surge protector.

Содержание MH9002



























Отзывы: