Desk Mounting
One of the special features of your telephone is the unique design of the MOUNTING BRACKET
which can hold your phone at an angle of 30º and 60º when desk mounting. There are two
positions to choose from:
1.
NORMAL POSITION (MOUNTING BRACKET not
required):
For normal position, as shown in Figure 1, place the
BASE UNIT
on any desired but suitable location.
2.
30° POSITION (See Figure 2):
With the back of the
BASE UNIT
facing up, insert the
hooks of the MOUNTING BRACKET (with the
position as shown in Figure 3) into the upper four
slots of the
BASE UNIT
. Then slide the MOUNTING
BRACKET upward until it locks into place.
3.
60° POSITION (See Figure 4):
With the back of the
BASE UNIT
facing up, insert the
hooks of the MOUNTING BRACKET (with the
position as shown in Figure 5) into the lower four
slots of the
BASE UNIT
. Then slide the MOUNTING
BRACKET upward until it locks into place.
Wall Mounting
You may choose to put the
BASE UNIT
of your cordless telephone on a wall.
1.
With the back of the
BASE UNIT
facing up, connect
the SHORT TELEPHONE LINE CORD to the
TELEPHONE LINE CONNECTION JACK.
2.
Insert the free end of the SHORT TELEPHONE LINE
CORD through the hole of the MOUNTING BRACKET.
3.
Insert the hooks of the MOUNTING BRACKET into
the matching slots on the back of the
BASE UNIT
(following the arrow direction for the WALL MOUNT)
then slide the MOUNTING BRACKET until it locks
into place. Plug the free end of the SHORT TELE-
PHONE LINE CORD into the MODULAR WALL JACK.
4.
Align the upper keyhole of the MOUNTING BRACKET
with the upper stud of the wall plate, so that the
opening end of the MOUNTING BRACKET matches
the lower stud, then pull the
BASE UNIT
down until
it is securely seated.
5.
Pull out the
HANDSET
RETAINER TAB in the
BASE
UNIT
then place the
HANDSET
to rest in the
BASE
UNIT
CHARGE CRADLE.
6
FIGURE 5
FIGURE 4
FIGURE 2
FIGURE 3
FIGURE 1
MOUNTING
BRACKET
MODULAR
WALL JACK
WALL
PLATE
WALL PLATE STUD
SHORT TELEPHONE
LINE CORD
