Getting Started
6
9.
Slide the
HANDSET
BATTERY
COMPARTMENT COVER firmly into place in
its closed position.
10. IMPORTANT: Before initial use, charge the
HANDSET for 12 hours. Do not charge the
HANDSET with the TELEPHONE KEYPAD
face down.
11.
TONE/PULSE Select Switch:
A.
If your home is equipped with a tone
dialing system, set the TONE/PULSE
Select Switch to the TONE position.
B.
If you have a rotary dialing system, set the
TONE/PULSE Select Switch to the
PULSE position.
C.
If you are not sure which system you
have, set the TONE/PULSE Select Switch
to the TONE position. Press the
button on the
HANDSET
to get a dial
tone, and press any button on the
TELEPHONE KEYPAD except the zero. If
the dial tone continues, it means that you
do not have TONE dialing service. Press
the button on the
HANDSET
to hang
up. Set the TONE/PULSE Select Switch
to the PULSE mode and then try again.
12.
Set the date and time on the
HANDSET
. (See page 22 for details.)
7.
Install the
HANDSET
BATTERY PACK by plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT.
8.
Place the BATTERY PACK inside the BATTERY COMPARTMENT.
AC ADAPTOR
TELEPHONE LINE CORD
TELEPHONE
JACK
120V WALL
OUTLET
TONE/PULSE
SELECT SWITCH
POWER-IN
CONNECTION JACK
TELEPHONE LINE
CONNECTION
JACK
BATTERY PACK
BATTERY
COMPARTMENT
COVER
Talk
Talk
manual 5815 analog.qxd 3/16/2004 2:40 PM Page 13
