bello-digital.com
A316
17
Care and Maintenance
• Use a soft, clean cloth that will not scratch the surface when dusting.
• Use of furniture polish is not necessary. Should you choose to use polish, test first in an
inconspicuous area.
• Using solvents of any kind on your furniture may damage the finish.
• Never use water to clean your furniture as it may cause damage to the finish.
• Liquid spills should be removed immediately, as it may damage the furniture. Use a soft,
clean cloth and blot the spill gently. Avoid rubbing.
• Always use protective pads under hot dishes and plates. Heat can cause chemical changes
that may create spotting within the furniture.
• If the supply cord is damaged it must be replaced by the manufacturer, it’s service agent or
similarly qualified persons in order to avoid a hazard.
• Only a qualified service person should repair this product.
• Do not use outdoors.
• Do not insert or allow foreign objects to enter the system as this may cause an electric shock,
fire, or damage to the appliance.
• Use this appliance only as described in the manual. Any other use not recommended by the
manufacturer may cause fire, electric shock or injury to persons.
PROBLEM
SOLUTION
After trying
above, the
Bluetooth is still
not working
Go into the device settings on the device/source and delete the sound
bar. Then go through the pairing process again, as shown earlier in the
manual to set up a new device.
If the above step does not correct the problem, unplug the sound bar
from the wall outlet for 10 minutes and try again. If the issue still persists
please contact www.tsicustomerservice.com
If there is no volume, or
low volume
If you are using your device/source to control the volume, make sure the
volume on the sound bar is turned up.
If you are using the sound bar remote to control the volume, make sure
the volume on your device/source is at maximum.
The LED display if not
reading correctly
If the display is showing half the digits, or not displaying correctly please
contact www.tsicustomerservice.com
Troubleshooting
