42
43
Troubleshooting in brief
Problem
Solution
Nothing happens when the transmitter is activated
with the test button.
• Check that the power supply unit is connected
correctly.
• If the power supply unit is not connected, change
the back-up battery. Only use an alkaline 6LR61 or a
lithium 6F22 type battery.
Make sure that the power supply unit is connected
correctly.
The LED (1) blinks yellow when the Bellman Visit
868 Bridge is activated!
• Change the back-up battery. Only use an alkaline
6LR61 or a lithium 6F22 type battery.
Make sure that the power supply unit is connected
correctly.
The LED (1) blinks green when the Bellman Visit
868 Bridge is activated but the receivers are not
responding.
• Check the batteries in the receivers.
• Check that the receivers are not placed too far
away by moving them closer to the Bellman Visit 868
Bridge.
• Check that the Bellman Visit 868 Bridge is set to
the correct Radio Key. For further information see
Function/Radio Key.
The receiver signals when no transmitter is activated. • Change the Radio Key on all units in the system.
For further information see Function/Radio Key.
1. LED. Combined transmission and back-up
battery indicator. For further information see
Indicators and Signals
2. Test button/pushbutton
3. Exterior External Trigger.
4. Signal Switch
5. Radio Key Switch
6. Connector for power supply unit
7. Battery cover
8. Wallmount bracket
For further information about the product in English, refer to the Appendix.
CZ
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
YU
