100
101
No adjustments are required for normal use. The relevant descriptions are provided below, if you
wish to change a setting for some reason.
Settings
Radio Key
In order to use several Bellman Visit 868 and/or Bellman Visit Systems close to one another without
interference, different Radio Keys can be set on the different systems. All Bellman Visit 868
System units are supplied from the factory tuned to the same Radio Key, channel 0. This means that
all Radio Key Switches (5) on the transmitters are set to the OFF position. The Radio Key setting
(referred to as a radio channel in the Bellman Visit System) is identical for both systems.
• To alter the Radio Key, move the Radio Key Switches (5) to the desired positions.
Please note: all Bellman Visit 868 and Bellman Visit products within a system must be tuned to the
same Radio Key in order to operate as a group. However, all Bellman Visit receivers are activated
when a fire alarm signal is detected regardless of the Radio Key.
Signal Pattern
A Signal Pattern is the name for the way in which a receiver in the Bellman Visit 868 System
indicates activation. Changing the transmitters’ Signal Switch changes the Signal Pattern which the
receivers display when the transmitter is activated. Follow the instructions under Appendix/Further
information/Settings/Setting the activation pattern to make your choice.
The following signal patterns for the Bellman Visit 868 System are available to the Bellman Visit
868 Bridge:
Type
LED-pattern
Sound
Vibration
Flash
Green 1
Green is constantly lit
1 x ding dong, lowfrequency
tone
Separate
Yes
Green 2
Green blinks in sequences of
two
2 x ding dong, lowfrequency
tone
Separate
Yes
Green 3
Green blinks in sequences of
three
1 x ding dong, highfrequency
tone
Separate
Yes
Green 4
Green blinks constantly
2 x ding dong, highfrequency
tone
Separate
Yes
Yellow 1
Yellow is constantly lit
1 x ring, lowfrequency tone
Short
Yes
Yellow 4
Yellow blinks contantly
2 x ring ring, highfrequency
tone
Short
Yes
Orange 1
Orange is contantly lit
Baby
Rapid
Yes
Orange 2
Orange blinks in sequences of
two
Baby
Rapid
Yes
Orange 3
Orange blinks in sequences of
three
Baby
Rapid
Yes
Orange 4
Orange blinks constantly
Baby
Rapid
Yes
VMA
Red and Orange constantly
blink alternately
VMA constant
Long
Yes
Fire alarm
Red blinks constantly
Fire alarm constant
Long
Yes
