Battery backup
BE1443
Getting started
Remove the battery slip on the bottom
of the unit before use.
Please charge the unit for 24 hours to
ensure full backup time.
Replacing batteries
(Done by the operator)
Remove the screw on the bottom of the
unit to exchange the batteries.
Use only 4x1.2VNiMH 900AAA Lexel
rechargeable batteries to ensure full
backup time.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
.
C
M
Y
CM
MY
CY
CMY
K
BE1443_battery backup.pdf 2 2013/11/27 11:00:36
Battery backup
BE1443
BE1443
CZ
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
SRB
APP
71
Smoke detector supervision
Pairing a smoke detector with the Flash receiver
Press (9) and hold the
top button for 5 seconds.
-
dicates that it is ready by
switching between the
green and the yellow LED
light.
Release the top button.
Press and hold the test
button on the smoke detec-
tor for more than 3 seconds.
Release the button.
indicate that pairing was
successful by switching
between the orange, green,
yellow and red LED lights
three times .
1
2
5 s
3 s
This menu shows the
position of the smoke
detector.
Attach the corre-
sponding label (pro-
vided with each smoke
detector) on the smoke
detector unit so you can
easily identify it later.
70
