Bellman & Symfon BE1441, Руководство пользователя

Страница: 34 / 40

Appendix - Further information
Settings
Please note: No adjustments are required for normal use. To change a settings, follow the
steps below.
Changing the radio key
If your Visit system is activated for no reason, there is probably a nearby system that trig-
gers yours. In order to avoid radio interference, you need to change the radio key on all
units. The radio key switches are located on the transmitters.
Here is how you change the radio key:
1
Open the transmitter cover and move any radio key switch to the up = on position to
change the radio key. See
Changing the radio key
for the relevant transmitter.
2 Press and hold the mute/test button on the top of the receiver until the green and yellow
Visit LEDs blink alternately. Release the button.
3 Press the test button/s on the transmitter within 30 seconds to send the new radio key.
4
All Visit LEDs on the receiver blink 5 times to show that the radio key has been changed.
It then returns to normal mode.
Please note: All Visit units must be set to the same radio key in order to operate as a group.
Changing the signal pattern
When a transmitter is activated, the flash receiver lights up a LED, flashes and the bed
shaker starts to vibrate with a certain pace. This is called signal pattern. The transmitters
determine the pattern. Changing the transmitters’ signal switch changes the signal pattern
on the flash receiver.
The following signal patterns are available for the Visit system:
(Please note that the flash receiver does not emit any sound.)
868/315MHz Europe, Asia
66 67
GB
Type LED pattern Sound Vibration Flash
Green 1 Green is
constantly lit
1 x ding dong, low-
frequency tone
Separate Yes
Green 2 Green blinks in
sequences of two
2 x ding dong, low-
frequency tone
Separate Yes
Green 3 Green blinks in
sequences of three
1 x ding dong,
high-frequency tone
Separate Yes
Green 4 Green blinks
constantly
2 x ding dong,
high-frequency tone
Separate Yes
Yellow 1 Yellow is
constantly lit
1 x ring, low-
frequency tone
Short Yes
Yellow 2 Yellow blinks in
sequences of two
2 x ring ring, low-
frequency tone
Short Yes
Yellow 3 Yellow blinks in
sequences of three
1 x ring, low-
frequency tone
Short Yes
Yellow 4 Yellow blinks
constantly
2 x ring ring, high-
frequency tone
Short Yes
Orange 1 Orange is
constantly lit
Baby Rapid Yes
Orange 2 Orange blinks in
sequences of two
Baby Rapid Yes
Orange 3 Orange blinks in
sequences of three
Baby Rapid Yes
Orange 4 Orange blinks
constantly
Baby Rapid Yes
VMA Red and Orange
constantly blink
alternately
VMA constant Long Yes
Fire alarm Red blinks constantly Fire alarm constant Long Yes
CZ
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
SRB
APP