35
36
1
Mount it
Remove the protective film from the Velcro on the
back of the transmitter and mount it on the wall.
Alternatively use the supplied screw and plug.
2
Turn it on
Pull the battery tab to start the transmitter. The
indicators light up in green to show that it is on.
3
Connect it
Connect the USB cable to the power adapter.
Then plug the adapter into a wall outlet. If you
have a landline telephone, connect it to the
telephone jack using the supplied splitter.
4
Test the mobile phone
Have someone call your mobile. The yellow LED
on the Visit receiver blinks and it starts to flash,
sound or vibrate (depending on the receiver).
5
Test the landline phone
Call your landline phone. The yellow LED on the
Visit receiver lights up and it starts to flash, sound
or vibrate (depending on the receiver).
The appearance of your
phone splitter may differ.
5
4
3
2
1
Installing the transceiver
EN
