Regulatory symbols
This symbol confirms that the product meets the
Medical Device Regulation EU 2017/745.
This symbol indicates the manufacturer’s serial number
so that a specific medical device can be identified. It’s
available on the product and gift box.
This symbol indicates the manufacturer’s catalogue
number so that the medical device can be identified.
It’s available on the product and gift box.
This symbol indicates the medical device manufacturer,
as defined in EU Directives 90/385/EEC, 93/42/EEC and
98/79/EC.
This symbol indicates that the user should consult the
instructions for use.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in the
instructions for use.
This symbol indicates important information for
handling and product safety.
Temperature during transport and storage:
–10° to 50° C, 14° to 122° F
Temperature during operation: 0° to 35° C, 32° to 95° F
Humidity during transportation and storage: <90%,
non-condensing. Humidity during operation: 15% to
90%, non-condensing.
Atmospheric pressure during operation, transportation
and storage: 700hpa to 1060hpa.
Operating
conditions
This device is designed such that it functions without
problems or restrictions if used as intended, unless
otherwise noted in the instructions for use.
With this CE symbol, Bellman & Symfon confirms that
the product meets EU standards for health, safety,
and environmental protection as well as the Radio
Equipment Directive 2014/53/EU.
This symbol indicates that the product shall not be
treated as household waste. Please hand over your old or
unused product to the applicable collection point for the
recycling of electrical and electronic equipment.
Compliance information
Hereby Bellman & Symfon declares that, in Europe, this
product is in compliance with the essential requirements of
the Medical Device Regulation EU 2017/745 as well as the
directives and regulations listed below. The full text of the
declaration of conformity can be obtained from Bellman &
Symfon or your local Bellman & Symfon representative.
Visit
bellman.com
for contact information.
Radio Equipment Directive (RED)
Medical Device Regulation (MDR)
Waste Electrical & Electronic Equipment (WEEE)
RoHS Directive
REACH Regulation
EC Battery Directive
Technical specifications
Dimensions
100
65
27 mm, 4.0
2.6
1.1”
Weight
198 g, 6.98 oz. including batteries,
telephone cable and power cable
Mains power
5 V DC / 1000 mA
Backup batteries
2
1.5 V AA Alkaline
Connectivity
RJ11 input to analogue telephone
network, 3.5 mm ext. trig input, Power
supply jack, Bluetooth Low Energy, BLE
Frequency
ISM frequency: 868.30 MHz
Transmission power: 4mw (max.)
Bluetooth freq: 2400 – 2483.5 MHz
Transmission power: 4mw (max.)
Coverage
ISM: Up to 250 m, depending on
the characteristics of the building.
Bluetooth: Up to 200 m
Compatibility
iOS11 and later / Android 6 and later
iPhone 6S and later / Modern Android
devices
In the box
BE1433 Mobile phone transceiver
(including batteries)
Screw and plug
Power adapter and power cable
Telephone splitter
Telephone cord
EN
43
44
